 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||||||
 Search
a Product |
||
 |
 |
 |
 |
 |
 |
| Home> Support> Installation |
DLX models are inserted beneath the existing toilet seat and require connection to a water supply. LUX models require access to a three prong grounded GFCI outlet which must be at least 10Amp and located within reach of the unit's power cord and connection to the toilet's water supply. (Please check the measurement as the following diagram before you start the installation.) :: Installation area measurement for LUX models:  |
||||||||||||||||||||||
|
|
Measure
the distances between the water tank and the end of the toilet bowl
(d2) as shwon in the diagram. If d2 is shorter than the length of
the FreshWash unit, then stop the installation and replace the water
tank with a smaller one. If the distances between the toilet seat mounting holes and the end of the toilet bowl (d1) is shorter than the distance between the FreshWash unit's groove and the end of the unit, the toilet bowl must be replaced with a proper one. |
|||||||||||||||||||||
|
Installation - DLX 201/ 301 | |||||||||||||||||||||
|
Installation - LUX 600 | |||||||||||||||||||||
|
Installation - LUX 511/ 711/ 811 | |||||||||||||||||||||
|
Installation - LUX 800 | |||||||||||||||||||||
Before installing FreshWash:
Copyright © 2004, Healthy Life Corporation. All Rights Reserved.